Premium Power Cut 200 (PPC 200) is the ultimate cutting polish for maximum vut and a beautiful shine on gelcoat, topcoat, GFC, CFRP, composites, perspex, PE resin and boat paints. Premium Power Cut 200 delivers perfect results in industrial boat and caravan construction as well as in detailing.

Suitable for

• Gelcoat
  - Topcoat
  - GFRP, CFRP-Composites
  - Perspex
  - PE-reisin
  - Boat paints
  And many more!

Benefits:

• Maximum cut
• Reduces the necessary polishing effort considerably
• Low consumption ensures cost savings
• Ideal for all types of gelcoat

 Recommended usage:

1. Clean the surface thoroughly.
2. Shake the bottle and apply about 15 g of polishing compound to the double-sided lambswool
3. Work in a crossing motion. Apply strong, even pressure while polishing and run the product at a consistently low speed. When the product has been homogeneously distributed and worked into the surface after a few seconds, increase the speed. Work over as large an area as possible to reduce heat build-up at certain points.
4. The polish is fully applied when only a slightly transparent or oily film is visible.
5. Remove polish residues with a microfibre cloth. Optionally, clean with Menzerna Control Cleaner to check the polishing result.
6. Grinding and wear marks are now removed. For a glossy surface, apply a Menzerna Finish product as required, e.g. when using on dark paintwork, to remove any holograms and polishing marks.